IMPROVING THE RELIABILITY OF THE HYDRAULIC PART OF THE OILFIELD PUMP, TAKING INTO ACCOUNT THE SELECTION OF MATERIAL FOR THE SEAL ASSEMBLY

Keywords: oilfield pumps; hydraulic part; seal assembly; reliability; cuff layout

Abstract

Many years of experience in the operation of oilfield equipment during underground well repair shows that ensuring the reliability and durability of the pumping units used is one of the main elements of the process chain, largely determined by the quality and performance characteristics of the friction units of the hydraulic parts of the pumps.

It is known that high-pressure oilfield pumps used in the repair of oil and gas wells carry out various technological works, including cementing, hydraulic fracturing, acid treatment, washing sand plugs and other washing and squeezing operations.

Parts of the hydraulic parts of the pumps are subjected to abrasive, corrosion-mechanical and corrosion-abrasive wear, which often leads to sudden failures, fraught with emergencies, additional costs and loss of time for unscheduled repairs.

The article considers the possibility of increasing the reliability of plunger oilfield pumps due to the correct removal of the material of the sealing collars and improving the assembly scheme. It is also proposed to use the diffusion monotonic distribution as a model of failure to evaluate the reliability function of the selected best compression scheme. Since this distribution model is a more flexible function that better aligns qualified data, compared to the well-known two-parameter strict probability models.

The results of the work have theoretical and practical prerequisites for assessing the reliability of field pumping units and may be useful for specialists working in this field

Downloads

Download data is not yet available.

Author Biographies

Ibrahim Abulfaz Habibov, Azerbaijan State Oil and Industry University

Department of Engineering and Computer Graphics

Vusala Shakir Huseynova, Azerbaijan State Oil and Industry University

Department of Engineering and Computer Graphics

Sevinj Malik Abasova, Azerbaijan State Oil and Industry University

Department of Engineering and Computer Graphics

References

Kharisov, M. I., Zabirov, F. S. (2019). Substantiation of improvement directions of piston drilling pump valve parts for their failure and tightness improving. Oil and Gas Business, 2, 112–127. doi: https://doi.org/10.17122/ogbus-2019-2-112-127

Valitov, M. Z. (2018). On the question of increase of the resource of units of the cylinder-piston unit of drilling and oil-pump pumps. Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii «Dostizheniya, problemy i perspektivy razvitiya neftegazovoy otrasli» Al'met'evsk: Izd-vo Al'met'evskogo gosudarstvennogo neftyanogo institut, 342–249. Available at: https://www.elibrary.ru/item.asp?id=32861062

Zhou, B. (2016). Methods Discussing to Improve The Efficiency of Pumping Unit Well System. Proceedings of the 2016 4th International Conference on Machinery, Materials and Computing Technology. doi: https://doi.org/10.2991/icmmct-16.2016.174

Nikolich, A. S. (1996). Sovershenstvovanie i spetsializatsiya porshnevyh nasosov dlya bureniya i dobychi nefti i gaza. Chemical and Petroleum Engineerig, 32, 157–162.

Okladnikova, E. N., Sugak, E. V. (2005). Probabilistic estimate of knots friction and wear resource. Sibirskiy zhurnal nauki i tehnologiy, 148–151.

Sin', T. (2011). Tribologiya i dinamika dvigatelya i silovoy ustanovki. Woodhead Pablishing, 1088.

Babaev, S. G., Kershenbaum, V. Ya., Gabibov, I. A. (2020). Evolyutsiya i nadezhnost' v kompleksah «kachestvo-konkurentosposobnost'» neftegazopromyslovogo oborudovaniya». Moscow: Natsional'niy institut nefti i gaza, 430.

Dyshin, O. A., Habibov, I. A., Shamilov, V. M., Rustamova, K. B. (2019). The structure of interfacial regions in polymer nanocomposites. PNRPU Mechanics Bulletin, 3, 140–148. doi: https://doi.org/10.15593/perm.mech/2019.3.14

Dyshin, O. A., Habibov, I. A., Rustamova, K. B. (2018). The properties of the structure of disperse-filled polymer composites. PNRPU Mechanics Bulletin, 2, 24–31. doi: https://doi.org/10.15593/perm.mech/2018.2.03

Grell'man, V., Seydler, S.; Malkin, A. Ya. (Ed.) (2010). Ispytaniya plastmass. Moscow: Nauchnye osnovy i tehnologii, 720.

Shah, V.; Malkin, A. Ya. (Ed.) (2009). Spravochnoe rukovodstvo po ispytaniyam plastmass i analizu prichin ih razrusheniya. Moscow: Nauchnye osnovy i tehnologii, 736.

Strel'nikov, V. P. (2007). Parametricheskaya DM raspredeleniya. Matematichekie mashiny i sistemy, 2, 117–124.


Abstract views: 23
PDF Downloads: 14
Published
2020-05-11
How to Cite
Habibov, I. A., Huseynova, V. S., & Abasova, S. M. (2020). IMPROVING THE RELIABILITY OF THE HYDRAULIC PART OF THE OILFIELD PUMP, TAKING INTO ACCOUNT THE SELECTION OF MATERIAL FOR THE SEAL ASSEMBLY. EUREKA: Physics and Engineering, (3), 51-59. https://doi.org/10.21303/2461-4262.2020.001222
Section
Engineering