Application of the principles of international standards to ensure quality and safety in the development of technology of bakery products of increased nutritional value
In order to manage quality and safety in the development of technology for new types of bakery products of increased nutritional value, the HACCP system was used.
Marketing research has shown that consumers would like to see more nutritious breads with natural additives on store shelves. Juniper (Juniperucommunis L) is one of the traditional crops growing in Kazakhstan and characterized by a high content of biologically active substances. In this regard, 3 % of crushed juniper fruits were added to the bread recipe.
In the course of research, a HACCP plan was developed for a new type of bread with increased nutritional value with the inclusion of juniper. As a result of the analysis of the bread production process, hazardous factors were identified and safety management measures were determined. Three critical control points were identified – during preparation (cleaning and grinding) of juniper fruits, during dough fermentation, and during storage of finished products. Once risk factors were identified, critical limits were identified, a monitoring procedure was established, and corrective actions were developed. The developed HACCP plan was tested at an enterprise for the production of bakery products, which led to an increase in the safety of products, and, accordingly, to an increase in its competitiveness in the consumer market of Kazakhstan.
Uazhanova, R.,Mannino, S., Tungyshbaeva, U.,Kazhymurat, A. (2018). Evaluation of the Effectiveness of Implementing Control Systems in the Increasing of Food Safety. Journal of Advanced Research in Dynamical and Control Systems, 10, 544–551.
Pozdnyakova, N. A. (2015). Quality system formation based on HACCP principles in JSC "Glinka" Kurgan. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Pischevye i biotekhnologii, 3 (2), 72–81.
Pozdnyakova, N. A., Dorofeeva, A. S. (2016). Upravlenie kachestvom myasnykh konservov. Vestnik Kurganskoy GSKHA, 2 (18), 74–77.
Vasileva, I. V., Unschikova, T. A., Stepanov, S. V. (2013). Razrabotka plana NASSR dlya obespecheniya bezopasnosti proizvodstva kvasa. Tekhnika i tekhnologiya pischevykh proizvodstv, 2, 1–6.
Tursunbayeva, Sh. A., Iztayev, A., Magomedov, М., Yakiyayeva, М. А.,Muldabekova, B. Zh. (2019). Studyofthequalityoflow-class wheat and bread obtained by the accelerated test method. J. Periodico Tchê Quimica, 16 (33), 809–822.
Tekhnicheskiy reglament Tamozhennogo Soyuza 021/2011 «O bezopasnosti pischevoy produktsii» No. 880. Vved. 2011–12–09 (2014). Tamozhenniy soyuz, 243.
Ibraimova, S. E., Uazhanova, R. U., Mardar, M. R. (2020). Marketingovye issledovaniya potrebitelskikh predpochteniy pri vybore khlebobulochnykh izdeliy. Mekhanika i tekhnologii, 1 (67), 129–134.
Circus, W., Wharf, C. (2011). Assessment report on Juniperus communis L., pseudofructus. European Medicines Agency. Available at: https://www.ema.europa.eu/en/documents/herbal-report/final-assessment-report-juniperus-communis-l-aetheroleum_en.pdf
Berkutenko, A. N., Virek, E. G. (1995). Lekarstvennye i pischevye rasteniya Alyaski i Dalnego Vostoka Rossii. Vladivostok: Izd-vo Dalnevostoch. un-ta, 47–53.
Berkutenko, A. N. (1995). Lekarstvennye i pischevye rasteniya. Travy Kavkaza. Izd-vo Dalnevostoch. un-ta, 47–53.
Koksharov, A. A. (2020). KhASSP na predpryiatyiakh obshchestvennoho pytanyia. Lan, 94.
Arshakuni, V. (2008). Ot sistemy KHASSP k sisteme menedzhmenta bezopasnosti pischevoy produktsii po ISO 22000. Standarty i kachestvo, 2, 88–89.
Ibraimova, S. E., Uazhanova, R. U., Mardar, M. R. (2020). Tasting evaluation of the quality of bread with the addition of juniper fruit. Vestnik Gosudarstvennogo universiteta imeni Shakarima, 1 (89), 115–118.
Tkachenko, A., Syrokhman, I., Lozova, T., Ofilenko, N., Goryachova, E., Hmelnitska, Y., Shurduk, I. (2019). Development of formulations for sponge cakes made from organic raw materials using the principles of a food products safety management system. Eastern-European Journal of Enterprise Technologies, 1 (11 (97)), 60–70. doi: http://doi.org/10.15587/1729-4061.2019.155775
👁 186 ⬇ 219
Copyright (c) 2021 Saniya Ibraimova, Raushangul Uazhanova , Ayana Serikbaeva , Maryna Mardar
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.