DEVELOPMENT OF A MODEL OF TECHNOLOGICAL SYSTEM OF SEMI-FINISHED PRODUCTS WITH EMULSION PASTE STRUCTURE
There was realized the analysis of modern methods of modification and correction of functional-technological properties of milk proteins for increasing the efficiency of their use in the technology of emulsion products. It was demonstrated, that it is prospective to use cheese-milk mixtures, based on decalcified milk raw materials at the expanse of the increased content of soluble protein. It was proved, that the use of decalcified milk raw materials results in raising the emulsifying power of systems and also in increasing indices of aggregative and kinetic stability. There was determined the aim of the study that is in elaborating a model of the technological system of semi-products with the emulsion paste structure. There was substantiated the expedience of using methods of system analysis at modeling the technological system of semi-products with the emulsion paste structure. There was designed the model of new products using the hierarchy of subsystems by levels. The aim of functioning of each separate subsystem was determined. Connections between separate elements of the system were assessed, internal and intersystem flows between them were analyzed. The influence of separate subsystems on formation of qualitative parameters of a final product was established. There were elaborated the way of forming the assortment of culinary and confectionary products based on semi-products with the emulsion paste structure. It was demonstrated, that depending on a fat content, new semi-products may be used in technologies of cold dishes and snacks, dessert products, hot dishes of sour milk cheese, confectionary products (especially, baked and dressing semi-products) and sauce group of products. Technological advantages of using developed semi-products were presented.
Raikos, V. (2010). Effect of heat treatment on milk protein functionality at emulsion interfaces. A review. Food Hydrocolloids, 24 (4), 259–265. doi: 10.1016/j.foodhyd.2009.10.014
Singh, H., Tamehana, M., Hemar, Y., Munro, P. A. (2003). Interfacial compositions, microstuctures and properties of oil-in-water emulsions formed with mixtures of milk proteins and κ-carrageenan: 1. Sodium caseinate. Food Hydrocolloids, 17 (4), 539–548. doi: 10.1016/s0268-005x(03)00026-2
Dickinson, E. (2001). Milk protein interfacial layers and the relationship to emulsion stability and rheology. Colloids and Surfaces B: Biointerfaces, 20 (3), 197–210. doi: 10.1016/s0927-7765(00)00204-6
Gurova, N. V. (1997) Ekologicheski bezopasnyie belkovyie preparatyi (tehnologii ih polucheniya i primeneniya v produktah lechebno-profilakticheskogo pitaniya). Inzhenernaya ekologiya, 6, 29–34.
Amine, C., Dreher, J., Helgason, T., Tadros, T. (2014). Investigation of emulsifying properties and emulsion stability of plant and milk proteins using interfacial tension and interfacial elasticity. Food Hydrocolloids, 39, 180–186. doi: 10.1016/j.foodhyd.2014.01.001
Shirashoji, N., Jaeggi, J. J., Lucey, J. A. (2006). Effect of Trisodium Citrate Concentration and Cooking Time on the Physicochemical Properties of Pasteurized Process Cheese. Journal of Dairy Science, 89 (1), 15–28. doi: 10.3168/jds.s0022-0302(06)72065-3
Guzman-Gonzalez, M., Morais, F., Amigo, L. (2000). Influence of skimmed milk concentrate replacement by dry dairy products in a low‐fat set‐type yoghurt model system. Use of caseinates, co-precipitate and blended dairy powders. Journal of the Science of Food and Agriculture, 80 (4), 433–438. doi: 10.1002/(sici)1097-0010(200003)80:4<433::aid-jsfa545>3.3.co;2-2
Granato, D., Branco, G. F., Cruz, A. G., Faria, J. de A. F., Shah, N. P. (2010). Probiotic Dairy Products as Functional Foods. Comprehensive Reviews in Food Science and Food Safety, 9 (5), 455–470. doi: 10.1111/j.1541-4337.2010.00120.x
Rulliere, C., Perenes, L., Senocq, D., Dodi, A., Marchesseau, S. (2012). Heat treatment effect on polyphosphate chain length in aqueous and calcium solutions. Food Chemistry, 134 (2), 712–716. doi: 10.1016/j.foodchem.2012.02.164
Plotnikova, R., Grynchenko, N., Pyvovarov, P. (2016). Study of influence of technological factors on the sorption of ionized calcium from skimmed milk by sodium alginate. Eastern-European Journal of Enterprise Technologies, 5 (11 (83)), 32–39. doi: 10.15587/1729-4061.2016.81413
Grynchenko, N., Tyutyukova, D., Pyvovarov, P. (2017). Study of quality indicators of fermented-milk cheese obtained from skimmed milk at a controlled content of calcium. Eastern-European Journal of Enterprise Technologies, 6 (11 (90)), 11–21. doi: 10.15587/1729-4061.2017.117136
Grynchenko, N., Tyutyukova, D., Pyvovarov, P. (2017). Study of influence of calcium content in milk on quality indicators of cottage cheese. EUREKA: Life Sciences, 6, 22–28. doi: 10.21303/2504-5695.2017.00510
Lindmark-Mansson, H., Fonden, R., Pettersson, H.-E. (2003). Composition of Swedish dairy milk. International Dairy Journal, 13 (6), 409–425. doi: 10.1016/s0958-6946(03)00032-3
Nelson, B. K., Barbano, D. M. (2005). A Microfiltration Process to Maximize Removal of Serum Proteins from Skim Milk Before Cheese Making. Journal of Dairy Science, 88 (5), 1891–1900. doi: 10.3168/jds.s0022-0302(05)72865-4
Copyright (c) 2018 Nataliya Grynchenko, Daria Tyutyukova, Pavlo Pyvovarov, Ðžleksandr Nagornyi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.