Experimental research of mass transfer in a stabilized foam layer

Keywords: industrial gas emissions, cleaning process, mass transfer, foam layer apparatus, foam layer, research of purification processes, stabilization of foam layer, intensive apparatus

Abstract

The object of research: mass transfer processes on a combined contact element in a column apparatus.

Investigated problem: determination of the regularities of process parameters in the processing of gas-liquid systems in a foam layer, as well as to interpret the obtained experimental data. The problem of processing industrial gas flows is solved by conducting the process in an intensive mode.

The main scientific results: as a result of the study, the regularities of ammonia absorption were revealed depending on the main parameters of the experiment: gas velocity in the column cross-section, ammonia concentration, free cross-section of the combined contact element, and liquid loads. The process of mass transfer in the gas phase is significantly influenced by hydrodynamic parameters – the gas velocity in the apparatus and the specific load on the liquid, which indirectly affect the height of the liquid layer on the plate and the gas content of the layer.

The area of practical use of the research results: sorption processes for processing gases and liquids in technological processes, absorption of harmful substances in the treatment of gas emissions.

Innovative technological product: new block poppet-nozzle contact device that operates in a stabilized hydrodynamic mode; new ball-shaped weighted nozzle for three-phase foam layer.

Scope of application the innovative technological product: technological processes in the treatment of gas emissions or technological gases.

Downloads

Download data is not yet available.

Author Biographies

Viktor Moiseev, National Technical University «Kharkiv Polytechnic Institute»

Department of Chemical Techniques and Industrial Ecology

Eugenia Manoilo, National Technical University «Kharkiv Polytechnic Institute»

Department of Chemical Techniques and Industrial Ecology

Oleg Khukhryanskiy, Sumy State University; UzLITI Engineering

Department of Chemical Engineering

Kalif Repko, National Technical University «Kharkiv Polytechnic Institute»

Department of Chemical Techniques and Industrial Ecology

References

Fourati, M., Roig, V., Raynal, L. (2012). Experimental study of liquid spreading in structured packings. Chemical Engineering Science, 80, 1–15. doi: http://doi.org/10.1016/j.ces.2012.05.031
Kong, Q. J., Liu, D. Y., Wang, P., Xie, D. Q., Wu, Q., Zhao, X. Y. (2019). Experimental study on the heat and mass transfer characteristics of a counter-flow wet cooling tower with foam ceramic packing. Thermophysics and Aeromechanics, 26 (2), 267–279. doi: http://doi.org/10.1134/s0869864319020100
Pavlenko, A. N., Pecherkin, N. I., Zhukov, V. E., Meski, G., Houghton, P. (2020). Overview of methods to control the liquid distribution in distillation columns with structured packing: Improving separation efficiency. Renewable and Sustainable Energy Reviews, 132, 110092. doi: http://doi.org/10.1016/j.rser.2020.110092
Zbytovský, J., Sommer, T., Zapletal, M., Trejbal, J. (2019). Comparison of various column packing materials efficiency for hydrocarbons and aqueous mixtures. Chemical & Biochemical Engineering Quarterly, 33 (2), 183–190. doi: http://doi.org/10.15255/cabeq.2018.1565
Clavier, R., Chikhi, N., Fichot, F., Quintard, M. (2017). Modeling of inertial multi-phase flows through high permeability porous media: Friction closure laws. International Journal of Multiphase Flow, 91, 243–261. doi: http://doi.org/10.1016/j.ijmultiphaseflow.2017.02.003
Fourati, M., Roig, V., Raynal, L. (2012). Experimental study of liquid spreading in structured packings. Chemical Engineering Science, 80, 1–15. doi: http://doi.org/10.1016/j.ces.2012.05.031
Kuznetsov, P. V. (2004). Structural parameters of the foam layer on fine-grained countercurrent lattices with a stabilizer. East European Journal of advanced technologies, 4 (10), 84–88.
Moiseev, V., Liaposhchenko, O., Trebuna, P., Manoilo, E., Khukhryanskiy, O. (2020). Properties of Heat and Mass Transfer Processes in the Tubular Grids with the Heat Exchanger as a Stabilizer. Advances in Design, Simulation and Manufacturing II. Springer, 795–804. doi: http://doi.org/10.1007/978-3-030-22365-6_79
Moiseev, V., Manoilo, E., Ponomarova, N., Repko, K., Davydov, D. (2018). Methodology of calculation of construction and hydrodynamic parameters of a foam layer apparatus for mass-transfer processes. Bulletin of the National Technical University «KhPI» Series: New Solutions in Modern Technologies, 16 (1292), 165–176. doi: http://doi.org/10.20998/2413-4295.2018.16.25
Moiseev, V., Liaposhchenko, O., Manoilo, E., Demianenko, M., Khukhryanskiy, O. (2021). Hydrodynamic Parameters of a Combined Contact Device. Advances in Design, Simulation and Manufacturing IV. Springer, 257–267. doi: http://doi.org/10.1007/978-3-030-77823-1_26
Perry, D. C., Stevenson, P. (2015). Gas absorption and reaction in a wet pneumatic foam. Chemical Engineering Science, 126, 177–185. doi: http://doi.org/10.1016/j.ces.2014.11.037
Marias, F., Puiggali, J. R., Flamant, G. (2001). Effects of Freeboard Volatile Release During Fluidized Bed Incineration of a Model Waste. Process Safety and Environmental Protection, 79 (4), 244–252. doi: http://doi.org/10.1205/095758201750362280
Moiseev, V., Мanoilo, E., Vasyliev, M., Repko, K., Davydov, D. (2017). Processing of gas-liquid systems on tubular gratings with stabilizer of a foam layer. Bulletin of the National Technical University «KhPI» Series: New Solutions in Modern Technologies, 53 (1274), 114–123. doi: http://doi.org/10.20998/2413-4295.2017.53.17
Jang, J., Arastoopour, H. (2014). CFD simulation of a pharmaceutical bubbling bed drying process at three different scales. Powder Technology, 263, 14–25. doi: http://doi.org/10.1016/j.powtec.2014.04.054
Wang, S., Wang, S., Wu, B., Lu, Y., Zhang, K., Chen, H. (2021). Effect of packing structure on anisotropic effective thermal conductivity of thin ceramic pebble bed. Nuclear Engineering and Technology, 53 (7), 2174–2183. doi: http://doi.org/10.1016/j.net.2021.01.013
Flagiello, D., Di Natale, F., Lancia, A., Erto, A. (2020). Characterization of mass transfer coefficients and pressure drops for packed towers with Mellapak 250.X. Chemical Engineering Research and Design, 161, 340–356. doi: http://doi.org/10.1016/j.cherd.2020.06.031
Clavier, R., Chikhi, N., Fichot, F., Quintard, M. (2017). Modeling of inertial multi-phase flows through high permeability porous media: Friction closure laws. International Journal of Multiphase Flow, 91, 243–261. doi: http://doi.org/10.1016/j.ijmultiphaseflow.2017.02.003

👁 31
⬇ 16
Published
2021-10-29
How to Cite
Moiseev, V., Manoilo, E., Khukhryanskiy, O., & Repko, K. (2021). Experimental research of mass transfer in a stabilized foam layer. ScienceRise, (5), 14-22. https://doi.org/10.21303/2313-8416.2021.002123
Section
Innovative technologies in industry