Simulation of the expander of the excess gas pressure utilization plant
Abstract
The object of research: The expander of the excess gas pressure utilization plant.
Investigated problem: Increasing the efficiency of the process of utilization of excess gas pressure during its distribution from main high-pressure gas pipelines. Development of hardware and software tools that provide automation of the process of regulating flow parameters under the influence of time-varying disturbances.
The main scientific results: A mathematical model of the process of utilization of excess gas pressure has been developed, and an experimental assessment of its adequacy has been carried out. With the help of the Matlab application “Linear Analysis Points”, the description of the object is linearized, which makes it possible to obtain its representation in the state space.
The area of practical use of the research results: The sphere of application of the results of the study is automation objects related to the regulation of gas flow parameters. The results of identification of model parameters provide an opportunity for the synthesis of the process controller.
Innovative technological product: In accordance with the task of increasing the efficiency of the process of utilization of excess gas pressure when it is distributed from the main high-pressure gas pipelines, a mathematical model of the channel for controlling the speed of rotation of the turbine (expander) has been developed, which serves as the basis for the synthesis of the regulator for the utilization process.
Scope of the innovative technological product: The developed model can be used in the construction of turbine speed controllers, which are used in the generation of electricity. The approach to the linearization of the description of the control object makes it possible to automate the process of identifying its parameters.
Downloads
References
Kuczyński, Sz., Łaciak, M., Olijnyk, A., Szurlej, A., Włodek, T. (2019). Techno-Economic Assessment of Turboexpander Application at Natural Gas Regulation Stations. Energies, 12, 755. doi: http://doi.org/10.3390/en12040755
Kubanov, A. N., Kozlov, A. V., Prokopov, A. V., Tcatculina, T. S. (2011). Primenenie turbokholodilnoi tekhniki na UKPG: kompressor-detander ili detander-kompressor. Nauka i tekhnika v gazovoi promyshlennosti, 3, 55–62.
Mikaelyan, E. A. (2015). Modernization of gas distribution systems using disposal turboexpanders. Oil and Gas Territory, 9, 36–39. Available at: https://tng.elpub.ru/jour/article/view/141
Zhavrockij, S. V., Strebkov, A. S., Osipov, A. V. (2015). Effective utilization of fuel gas excess pressure in two-stage expander. St. Petersburg State Polytechnical University Journal, 219 (2), 72–82. doi: http://doi.org/10.5862/jest.219.9
Chobenko, V. N., Kucherenko, O. S., Evseenko, A. V. (2008). Experimentalnie harakteristiki utilizacionnogo detander-generatornogo agregata moshnostju 2.5 Mwt. Naukovi pratsi ChDU imeni Petra Mohyly – Tekhnohenna bezpeka, 64 (77), 41–48.
Kulinchenko, H., Leontiev, P., Drozdenko, O. (2021). Development of extreme regulator of separation moisture from the gas stream. ScienceRise, 2, 3–10. doi: http://doi.org/10.21303/2313-8416.2021.001815
Kulinchenko, H., Leontiev, P. (2016). Modelling a throttling device during separation of moisture from gas flow. Eastern-European Journal of Enterprise Technologies, 4 (7 (82)), 23–29. doi: http://doi.org/10.15587/1729-4061.2016.75143
Vanyeyev, S. M., Radchenko, M. I., Meleychuk, S. S., Baga, V. М., Rodymchenko, T. S. (2020). Modelling the energy characteristics of a jet-reactive turbine. Aerospace technic and technology, 1, 22–27. doi: http://doi.org/10.32620/aktt.2020.1.04
Vanyeyev, S. M., Berezhnyi, O. S. (2011). Rezultaty issledovanii rezhima kholostogo khoda i puskovogo rezhima struino-reaktivnoi turbiny. Naukovi pratsi DonNTU. Seriia: Hirnycho-elektromekhanichna, 22, 32–41.
Dabney, J. B., Harman, T. L. (2003). Mastering Simulink 4. Moscow: BINOM. Laboratoriia znanii, 403.
Belikov, J., Kaldmae, A., Kotta, U. (2017). Global linearization approach to nonlinear control systems: a brief tutorial. Proceedings of the Estonian Academy of Sciences, 66 (3,) 243–263. doi: http://doi.org/10.3176/proc.2017.3.01
Kulanina, Y. V., Yarymbash, D. S., Kotsur, М. І., Yarymbash, S. T. (2019). Linearization of object model with vector control. Radio Electronics, Computer Science, Control, 2, 189–201. doi: http://doi.org/10.15588/1607-3274-2019-2-20
Copyright (c) 2022 Heorhіi Kulіnchenko, Andrii Panych, Petro Leontiev, Viacheslav Zhurba
This work is licensed under a Creative Commons Attribution 4.0 International License.
Our journal abides by the Creative Commons CC BY copyright rights and permissions for open access journals.
Authors, who are published in this journal, agree to the following conditions:
1. The authors reserve the right to authorship of the work and pass the first publication right of this work to the journal under the terms of a Creative Commons CC BY, which allows others to freely distribute the published research with the obligatory reference to the authors of the original work and the first publication of the work in this journal.
2. The authors have the right to conclude separate supplement agreements that relate to non-exclusive work distribution in the form in which it has been published by the journal (for example, to upload the work to the online storage of the journal or publish it as part of a monograph), provided that the reference to the first publication of the work in this journal is included.