Characterization of temperature trends for predicting heavy-duty drum brake failure through a rotational test rig

Authors

DOI:

https://doi.org/10.21303/2461-4262.2026.004171

Keywords:

brake failure, axle-level brake test rig, brake temperature monitoring, fuzzy logic-based early warning system (EWS)

Abstract

This research investigates drum brake systems in heavy-duty vehicles at the wheel-axle level using a rotational brake test rig with temperature data acquisition. Conventional methods have limited capability to provide early and continuous detection of brake failure, especially in heavy-duty applications, while most previous researches focus on light vehicles with different thermal characteristics and degradation mechanisms. The results show that temperature-based pre-failure indicators can be identified through axle-level testing by analyzing deviations from a normal temperature threshold of 60°C, determined using the mean plus standard deviation criterion. The tests yielded thresholds of 46°C for vapor lock, 52°C for oil contamination, 60°C for normal braking, 69°C for continuous friction, and 78°C for lining wear. These temperature responses are classified into three condition levels, low, medium, and high, representing warning, normal, and critical braking conditions within a fuzzy logic based Early Warning System (EWS). The deviation patterns indicate changes in thermal behavior caused by brake degradation, as evidenced by reduced braking effectiveness at low temperatures and excessive heat accumulation at high temperatures. The proposed method derives temperature thresholds from statistical analysis of experimental data and translates them into overlapping fuzzy membership functions with reference points obtained from test results. This approach enables gradual and interpreTable interpretable identification of brake degradation and provides a basis for distinguishing different braking conditions. The findings support the development of brake condition monitoring systems for heavy-duty vehicles and provide a basis for implementing early warning systems in real vehicles through instrumentation adaptation and field calibration to improve braking safety.

Downloads

Download data is not yet available.

Author Biographies

  • Rolan Siregar, Universitas Darma Persada

    Department of Mechanical Engineering

  • Didik Sugiyanto, Universitas Darma Persada

    Department of Mechanical Engineering

  • Juan Pratama, Universitas Darma Persada

    Department of Mechanical Engineering

  • Yendi Esye, Universitas Darma Persada

    Department of Electrical Engineering

  • Suzuki Syofian, Universitas Darma Persada

    Department of Information Engineering

References

Wibowo, D. B., Haryanto, I., Laksono, N. P. (2016). Indonesian commercial bus drum brake system temperature model. AIP Conference Proceedings, 1717, 50003. https://doi.org/10.1063/1.4943478

Ansori, I., Waskito, D. H., Mutharuddin, M., Irawati, N., Nugroho, S., Mardiana, T. S. et al. (2023). Enhancing Brake System Evaluation in Periodic Testing of Goods Transport Vehicles through FTA-FMEA Risk Analysis. Automotive Experiences, 6 (2), 320–335. https://doi.org/10.31603/ae.8394

Nandiyanto, A. B. D., Al Husaeni, D. N., Ragadhita, R., Fiandini, M., Al Husaeni, D. F., Aziz, M. (2022). Resin Matrix Composition on the Performance of Brake Pads Made from Durian Seeds: From Computational Bibliometric Literature Analysis to Experiment. Automotive Experiences, 5 (3), 328–342. https://doi.org/10.31603/ae.6852

Grkić, A., Mikluc, D., Muždeka, S., Arsenić, Ž., Duboka, Č. (2015). A Model for the Estimation of Brake Interface Temperature. Strojniški Vestnik – Journal of Mechanical Engineering, 61 (6), 392–398. https://doi.org/10.5545/sv-jme.2014.2364

Jaenudin, Jamari, J., Tauviqirrahman, M. (2017). Thermal analysis of disc brakes using finite element method. AIP Conference Proceedings, 1788, 30028. https://doi.org/10.1063/1.4968281

Subramaniam, R., Subramanian, S., Krishnamurthy, B., Rakkiyannan, J., Gnanasekaran, S., Bhalerao, Y. (2023). Brake fault diagnosis using histogram features and artificial immune recognition system (AIRS). Proceedings of the Tim20-21 Physics Conference, 2843, 50002. https://doi.org/10.1063/5.0149302

Das, S. S., Kumar, R., Prusty, M. R., Mahanta, T. K., Patra, S. R. (2025). Hydraulic brake fault detection from acoustic signals using frequency domain filter bank integrated deep learning framework. Cogent Engineering, 12 (1). https://doi.org/10.1080/23311916.2025.2549368

Jarrah, M. A., Shaout, A. (1999). Automatic braking system using fuzzy logic. Journal of Intelligent & Fuzzy Systems: Applications in Engineering and Technology, 7 (1), 47–54. https://doi.org/10.3233/ifs-1999-022

Jegadeeshwaran, R., Sugumaran, V. (2015). Brake fault diagnosis using Clonal Selection Classification Algorithm (CSCA) – A statistical learning approach. Engineering Science and Technology, an International Journal, 18 (1), 14–23. https://doi.org/10.1016/j.jestch.2014.08.001

Yan, M., Xu, J. (2018). Prediction Model for Brake-Drum Temperature of Large Trucks on Consecutive Mountain Downgrade Routes Based on Energy Conservation Law. Mathematical Problems in Engineering, 2018, 1–10. https://doi.org/10.1155/2018/4587673

Majuma, R., Peeie, M. H. B., Ondong, K., Hassan, O. A. (2023). Investigation of Brake Pad Wear Effect due to Temperature Generation Influenced by Brake Stepping Count on Different Road Terrains. Automotive Experiences, 6 (2), 234–244. https://doi.org/10.31603/ae.8869

He, Y., He, E., Zhang, L., Gao, J., Yang, C., Sun, L. et al. (2024). Brake Drum Temperature Rise and Its Influence on Truck Driving Safety in Tunnel Groups Section. Complexity, 2024 (1). https://doi.org/10.1155/2024/5552467

Siregar, R., Adhitya, M., Sumarsono, D. A., Nazaruddin, N., Heryana, G., Prasetya, S., Zainuri, F. (2021). Optimization of temperature measurement on the bus drum brake as a basis for developing brake fault signals. Eastern-European Journal of Enterprise Technologies, 1 (1 (109)), 13–19. https://doi.org/10.15587/1729-4061.2021.224907

Mladenov, G. D., Saliev, D. N., Abdurahman, H. (2022). Integrated brake disc temperature measurement system. 17th International Conference on Concentrator Photovoltaic Systems (Cpv-17), 2550, 50008. https://doi.org/10.1063/5.0091883

Adhitya, M., Siregar, R., Sumarsono, D. A., Nazaruddin, N., Heryana, G., Prasetyo, S., Zainuri, F. (2020). Experimental analysis in the test rig to detect temperature at the surface disc brake rotor using rubbing thermocouple. Eastern-European Journal of Enterprise Technologies, 2 (5 (104)), 6–11. https://doi.org/10.15587/1729-4061.2020.191949

Day, A. (2014). Braking of Road Vehicles. Butterworth-Heinemann. https://doi.org/10.1016/c2011-0-07386-6

Jegadeeshwaran, R., Sugumaran, V. (2020). Health Monitoring of a Hydraulic Brake System Using Nested Dichotomy Classifier – A Machine Learning approach. International Journal of Prognostics and Health Management, 6 (1). https://doi.org/10.36001/ijphm.2015.v6i1.2242

Characterization of temperature trends for predicting heavy-duty drum brake failure through a rotational test rig

Downloads

Published

2026-09-30

Versions

  • 2026-09-30 (Version of Record 1.0)

Data Availability Statement

Data will be made available on reasonable request.

Funding Statement

The development of the brake system test rig used in this study was supported by the Directorate General of Higher Education, Research, and Technology, Ministry of Higher Education, Science, and Technology of Indonesia.

Issue

Section

Engineering

Funders

  • Directorate General of Higher Education, Research, and Technology, Ministry of Higher Education, Science, and Technology of Indonesia

How to Cite

Siregar, R., Sugiyanto, D., Pratama, J., Esye, Y., & Syofian, S. (2026). Characterization of temperature trends for predicting heavy-duty drum brake failure through a rotational test rig. EUREKA: Physics and Engineering, 5, 148-157. https://doi.org/10.21303/2461-4262.2026.004171

Most read articles by the same author(s)