Influence of anti-seismic strengthening schemes on the load-bearing capacity and lateral stiffness of reinforced concrete frames of multi-story buildings

Authors

DOI:

https://doi.org/10.21303/2461-4262.2026.004404

Keywords:

seismic strengthening, reinforced concrete frames, masonry infill walls, steel X-bracing, CFRP retrofitting, lateral stiffness

Abstract

The object of research is a reinforced concrete frame of a multi-story building strengthened by various anti-seismic methods. The problem solved is the lack of comparative experimental data on how different strengthening techniques affect the load-bearing capacity and rigidity of such frames under lateral loading. Frame models were built at a 1/3 scale using extended similarity theory, both unreinforced and reinforced with carbon fiber fabrics (Russian and Turkish), steel profile jackets, steel corner stiffeners, X-shaped steel braces, and brick infill. A test methodology and a strain-gauge measuring system were developed; static load was applied by a 50 tf hydraulic jack at the top of the frame and recorded with a dynamometer. The results show that, of all methods considered, X-shaped steel braces and brick infill provide the highest load-bearing capacity: the failure load rose from 14000 N for the unreinforced frame to 33000 N, and bending stiffness increased by 59 percent (from 661600 to 1597100 N/m). This is explained by the braces and infill engaging the frame as a stiff diagonal load path that redistributes lateral forces and limits displacement. A distinctive feature of the work is the direct experimental comparison of six reinforcement schemes on identical scaled frames under the same loading conditions, which made it possible to rank them objectively. However, brick infill increases the structural mass and thus the seismic inertial load on the floors, adversely affecting overall seismic resistance. The results provide an objective basis for choosing between strengthening schemes in the seismic retrofitting of existing multi-story frame buildings in high-seismicity regions, favoring lightweight, high-stiffness solutions.

Downloads

Download data is not yet available.

Author Biographies

  • Anvar Yuvmitov, Institute of Mechanics and Seismic Stability of Structures named after M. T. Urazbaev

    Department of Experimental Studies of Structural Strength and Seismic Stability of Structures

  • Saidgani Yusufkhojaev, Tashkent University of Architecture and Civil Engineering

    Department of Civil Engineering

  • Salimjon Toshpulatov, Institute of Mechanics and Seismic Stability of Structures named after M. T. Urazbaev

    Department of Experimental Studies of Structural Strength and Seismic Stability of Structures

  • Dilmurod Akhundjanov, Institute of Mechanics and Seismic Stability of Structures named after M. T. Urazbaev

    Department of Experimental Studies of Structural Strength and Seismic Stability of Structures

  • Sukhrob Bozorkulov, Tashkent University of Architecture and Civil Engineering

    Department of Civil Engineering

References

Rashidov, T., Takhirov, S., Sagdiev, H., Nishonov, N. (2019). Future world-class laboratory for seismic resistance of structures and new research horizons aimed at addressing the needs of the Republic of Uzbekistan in this area. Uzbek journal Problems of Mechanics, 1, 95–101.

Gkournelos, P. D., Triantafillou, T. C., Bournas, D. A. (2021). Seismic upgrading of existing reinforced concrete buildings: A state-of-the-art review. Engineering Structures, 240, 112273. https://doi.org/10.1016/j.engstruct.2021.112273

Tsionis, G., Apostolska, R., Tauce, F. (2014). Seismic strengthening of RC buildings. Publications Office of the European Union. https://doi.org/10.2788/138156

Tastani, S., Thermou, G. (2022). An Example-Guide for Rapid Seismic Assessment and FRP Strengthening of Substandard RC Buildings. Applied Sciences, 12 (24), 12950. https://doi.org/10.3390/app122412950

Wang, Y., Chen, W., Li, D., Xu, H., Zhang, F., Guo, X. (2023). Experimental and Numerical Investigations of the Seismic Performance of Reinforced Concrete Frames Strengthened with CFRP Sheets. Buildings, 13 (9), 2195. https://doi.org/10.3390/buildings13092195

Sadeghinezhad, S., Kheyroddin, A., Mortezaei, A. (2021). Strengthening of vulnerable RC moment resisting frames using direct internal connection of X-steel bracing. Periodica Polytechnica Civil Engineering. https://doi.org/10.3311/ppci.17008

Thermou, G. E., Pantazopoulou, S. J., Elnashai, A. S. (2012). Global Interventions for Seismic Upgrading of Substandard RC Buildings. Journal of Structural Engineering, 138 (3), 387–401. https://doi.org/10.1061/(asce)st.1943-541x.0000474

Gaitan, J. D. (2017). Retrofit of Reinforced Concrete Columns. The Ohio State University. Available at: https://kb.osu.edu/server/api/core/bitstreams/bf34d947-b268-5c55-8ba4-081373e13c90/content

Sudarsana, I. K. (2017). Retrofitting of Low Rise Reinforced Concrete Building Using External Bolted Steel Plates Case Study: SPS Building, Jimbaran, Bali-indonesia. Procedia Engineering, 171, 1147–1156. https://doi.org/10.1016/j.proeng.2017.01.479

Badoux, M., Jirsa, J. O. (1990). Steel Bracing of RC Frames for Seismic Retrofitting. Journal of Structural Engineering, 116 (1), 55–74. https://doi.org/10.1061/(asce)0733-9445(1990)116:1(55)

Chong, X., Liu, H., Xie, L., Zhou, A., Huang, J., Sha, H. (2024). Experimental investigation of retrofitting seismically damaged reinforced-concrete frames using steel jacketing. Structures, 62, 106243. https://doi.org/10.1016/j.istruc.2024.106243

Arroyo, O., Barros, J., Ramos, L. (2018). Comparison of the Reinforced‐Concrete Seismic Provisions of the Design Codes of the United States, Colombia, and Ecuador for Low‐Rise Frames. Earthquake Spectra, 34 (2), 441–458. https://doi.org/10.1193/102116eqs178ep

Kim, M. S., Lee, Y. H. (2022). Seismic Performance of Reinforced Concrete Columns Retrofitted with Hybrid Concrete Jackets Subjected to Combined Loadings. Materials, 15 (18), 6213. https://doi.org/10.3390/ma15186213

El-Amoury, T., Ghobarah, A. (2005). Retrofit of RC frames using FRP jacketing or steel bracing. Journal of Seismology and Earthquake Engineering (JSEE), 7 (2), 83–94. Available at: https://www.jsee.ir/article_240518.html

Park, J., Lee, S.-C., Chae, Y., Cho, J.-Y. (2025). A new similitude law for testing scaled RC structures. Scientific Reports, 15 (1). https://doi.org/10.1038/s41598-025-05038-5

Yang, X., Lu, W., Ren, X., Xue, B. (2023). Scaling method for small sized model testing of steel‐reinforced concrete structures. Earthquake Engineering and Resilience, 2 (4), 418–435. https://doi.org/10.1002/eer2.65

Seismic Evaluation and Retrofit of Existing Concrete Buildings—Code and Commentary. Reported by ACI Committee 369. ACI CODE-369.1-22 (2023). American Concrete Institute. Available at: https://www.concrete.org/Portals/0/Files/PDF/Previews/369.1-22_preview.pdf

Algamati, M., Al-Sakkaf, A., Mohammed Abdelkader, E., Bagchi, A. (2023). Studying and Analyzing the Seismic Performance of Concrete Moment-Resisting Frame Buildings. CivilEng, 4 (1), 34–54. https://doi.org/10.3390/civileng4010003

Influence of anti-seismic strengthening schemes on the load-bearing capacity and lateral stiffness of reinforced concrete frames of multi-story buildings

Downloads

Published

2026-09-30

Versions

  • 2026-09-30 (Version of Record 1.0)

Data Availability Statement

Data will be made available on reasonable request.

Funding Statement

The research was performed without financial support.

Issue

Section

Engineering

How to Cite

Yuvmitov, A., Yusufkhojaev, S., Toshpulatov, S., Akhundjanov, D., & Bozorkulov, S. (2026). Influence of anti-seismic strengthening schemes on the load-bearing capacity and lateral stiffness of reinforced concrete frames of multi-story buildings. EUREKA: Physics and Engineering, 5, 102-118. https://doi.org/10.21303/2461-4262.2026.004404