• Nikolai Kobasko Intensive Technologies Ltd
Keywords: polyoxyethylene, low concentration, insulating layer, governing surface temperature, new technology, increased surface life


In the paper is shown a possibility to govern surface temperature of steel parts during quenching by controlling the thickness of the insulating layer. That results in developing the new quenching technologies like austempering process via cold liquids. The investigations were performed with a low concentration of the polyethylene in cold water using 20 mm cylindrical probe instrumented with two thermocouples. It is established that with the increase concentration of polyoxyethylene in cold water (beginning from 0.001 %) different heat transfer modes are observed resulting in the elimination of film boiling process at 0.001 % concentration, increasing surface temperature of probe during self – regulated thermal process, periodical changing of heat flux densities, slow cooling of surface temperature like in oil when concentration reaches 1 % polyoxyethylene in water, and so on. It is underlined that low concentration of polyoxyethylene in water can serve as an excellent quenchant for accelerated and uniform cooling of steel parts decreasing by this way the cost of a coolant. In this case accelerated cooling should be interrupted at proper time to provide optimal hardened layer afterr quenching. Such approach guarantees increasing service life of steel parts after accelerated cooling with the significant decrease of their cost and eliminates carburization process, The technology can be used for hardening large steel parts like large wind mill gears, large bearing rings, etc.


Download data is not yet available.


Kobasko, N. (2017). Cooling intensity of inverse solubility polyalkylene glykol polymers and some results of investigations focused on minimizing distortion of metal components. EUREKA: Physics and Engineering, 2, 55–62. doi:

Kobasko, N. I. (2012). Real and Effective Heat Transfer Coefficients (HTCs) Used for Computer Simulation of Transient Nucleate Boiling Processes during Quenching. Materials Performance and Characterization, 1 (1), 104656. doi:

Kovalenko, G. V., Kobasko, N. I., Khalatov, A. A., (1987). A Method of Hardening of Steel Components. USSR, Certificate No. 1355634. Bul. No. 44.

Kobasko, N., Liscic, B. (2017). Liscic/petrofer probe to investigate real industrial hardening processes and some fundamentals during quenching of steel parts in liquid media. EUREKA: Physics and Engineering, 6, 48–56. doi:

Polietilenoksid. Available at:

Balley, F. E., Koleske, J. V. (1976). Poly (Ethylene Oxyde). Elsevier, 184. doi:

Tensi, H. M. (1992). Wetting Kinematics. Theory and Technology of Quenching, 93–116. doi:

French, H. J. (1930). The Quenching of Steels. Cleveland, Ohio, USA: American Society for Steel Treating, 177.

Kobasko, N. I. (1980). Steel Quenching in Liquid Media Under Pressure. Kyiv: Naukova Dumka, 206.

Liščić, B. (2016). Measurement and Recording of Quenching Intensity in Workshop Conditions Based on Temperature Gradients. Materials Performance and Characterization, 5 (1), MPC20160007. doi:

Krivoshei, F. A. (1993). Solution of Inverse Problems of Heat Transfer Based on the Method of Statistical Regularization. Kyiv.

Kobasko, N. I., Krivoshei, F. A. (1994). On the Mechanism of Temperature and Heat Flow Oscillations in Cooling Metallic Specimens in Aqueous Solutions of Polymers. Dokl. Akad. Nauk Ukr., 11, 90–94.

Tolubinsky, V. I. (1980). Teploobmen pri kipenii [Heat transfer at boiling]. Kyiv: Naukova Dumka.

Kutateladze, S. S. (1963). Fundamentals of Heat Transfer. New York: Academic Press, 485.

Kutateladze, S. S. (1950). Hydrodynamic Crisis Model of Heat Transfer in Boiling Liquid at Free Convection. Journal of Engineering Physics, 20 (11), 1389–1392.

Incropera, F. P., DeWitt, D. P. (1981). Fundamentals of Heat and Mass Transfer. New York: John Wiley & Sons.

Isachenko, V. P., Osipova, V. A., Sukomel, A. S. (1981). Teploperedacha [Heat transfer]. Moscow: Energomash.

Liscic, B. (2003). Critical Heat-Flux Densities, Quenching Intensity and Heat Extraction Dynamics During Quenching in Vaporizable Liquids. Proceedings of the 4th International Conference on Quenching and the Control of Distortion. Beijing, 21–28.

Kobasko, N., Aronov, M., Powell, J., Totten, G. (2010). Intensive Quenching Systems: Engineering and Design. ASTM International, 242. doi:

ASTM Standard D6200-97: Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis (2001). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.

ASTM Standard D6482-99: Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants with Agitation (Tensi Method) (2000). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.

ASTM Standard D6549-00: Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit) (2000). Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.

Kobasko, N. I. (2017). A Universal Correlation for the Calculation of Heating and Cooling Time of Any Steel. Materials Performance and Characterization, 6 (1), 20170034. doi:

Austempering Calculation Software. Available at:

Optimized Polymer Quenching Calculation Software. Available at:

Kobasko, N. I. (2018). Optimal Hardenability Steel and Method for Its Composing. Lambert Academic Publishing, 122.

Grossmann, M. A. (1964). Principles of Heat Treatment. Ohio: American Society for Metals, 302.

Dossett, J. I., Totten, G. E. (Eds.) (2013). ASM Handbook, Volume 4A: Steel Heat Treating Fundamentals and Processes. ASM International, 784.

Narazaki, M., Fuchizawa, S., Kogawara, M., Inaba, M. (1993). Effects of Surface Oxidation on Cooling Characteristics during Quenching of Heated Metals in Subcooled Water. Tetsu-to-Hagane, 79 (5), 583–589. doi:

Frenkel, Ya. I. (1959). Kinetic Theory of Liquids, Selected Works. Vol. 3. Moscow.

Fedorov, V. I., Kovalenko, G. V., Kostanchuk, D. M. (1977). Boiling of fluid on a metal surface. Journal of Engineering Physics, 32 (1), 10–14. doi:

Moreaux, F., Beck, G. (1992). Effect of Workpiece Surface Properties on Cooling Behaviour. Theory and Technology of Quenching, 182–207. doi:

Walker, J. (1988). Boiling and the Leidenfrost Effect, Fundamentals of Physics. John Willey & Sons.

Daming, M. (1990). Intense Quenching Method for Preventing Quench Cracking. Proceedings of the Seventh International Congress on Heat Treatment and Technology of Surface Coating. Vol. 2. Moscow, 62–71.

Han, S. W., Kang, S. H., Totten, G. E., Webster, G. M. (1995). Immersion Time Quenching. Advanced Materials & Processes, 148 (3), 42AA–42DD.

👁 436
⬇ 244
How to Cite
Material Science

Most read articles by the same author(s)

1 2 > >>